Console users many may know that there are have the PS3 jailbreak, and many of them know there is some kind called PS3 YES. Compared with the PS3 jailbreak and other PS3 products, the PS3 YES has some difference.
First the PS3 YES can ne flashed with other hex but it will lose its upgrade function, this may be a pity for the users. Since it has the most same function as the PS3 jailbreak as a gaming break tool to up your gaming experience .Insert your PS3YES into the PC, the LED lights on it come to have their bights and you will soon find yourself enter into the upgrade interface. Users can download the firmware from a device called “AT90USB162 DFU” on your PC, and then users can use the flip to flash it now. Remember that PS3 YES is based on ATMEL AT90USB162 chip, which is upgradable for sure. PS3YES have released the latest firmware based on PSGroove, so don’t flash it with the custom PSGroove which will disable the auto-upgrade mode.the once the driver called “AT90USB162 DFU” installed, the HEX files can be downloading and be saved. Do not forget to keep the “auto enter upgrade mode” function. So that you can flash any HEX files as you like .The next thing is to upgrade its hard driver.
How to upgrade How to update PS3YES-Programm’s firmware?
Step 1. Connect PS3YES-Pro to your PC’s USB port
Step 2. About 6 seconds later, PS3YES-Pro’s 8MB USB storage will be installing on you PC.
Step 3. Right-click on the USB disk’s root path, and create a new text file and renamed it to ‘enter DUF.
Step 4. Eject the USB disk to PS3YES-Pro, remove it from PC and re-plug it to your PC’s USB port.
(The following steps also used on PS3YES! and PS3YES-Pro too)
Step 5. About 30 seconds later, the LED on PS3YES-Pro will switch off; you should install the ATMEL DFU driver to run the FLIP tool. You can jump to Step 8 if it was installed already.
Step 6. Install drivers to “AT90USB162″ device, you should download and install FLIP tool from ATMEL.
Step 7. You can found drivers to “AT90USB162” in the path of FLIP were installed, for example: “C:\Program Files\Atmel\Flip 3.4.2\usb”.
Step 8. Download the correct firmware’s hex file. Make sure it was storage in a full English path and without space. For example “c:\”.
Step 9. Run the FLIP tool. Make sure at the first use the “Load Hex File…” menu under “File” menu to load the new firmware hex file.
Step 10. Click the USB icon on FLIP and select “USB”, or press CTRL-U, and click “open” button in the following dialogs.
Step 11. Click “Run” button start update PS3YES-Pro’s firmware.
In the next topic there will be come to how to use PS3YES-Pro downgrade the console’s firmware from 3.50 .there are always so much topic for the console users yet .
First the PS3 YES can ne flashed with other hex but it will lose its upgrade function, this may be a pity for the users. Since it has the most same function as the PS3 jailbreak as a gaming break tool to up your gaming experience .Insert your PS3YES into the PC, the LED lights on it come to have their bights and you will soon find yourself enter into the upgrade interface. Users can download the firmware from a device called “AT90USB162 DFU” on your PC, and then users can use the flip to flash it now. Remember that PS3 YES is based on ATMEL AT90USB162 chip, which is upgradable for sure. PS3YES have released the latest firmware based on PSGroove, so don’t flash it with the custom PSGroove which will disable the auto-upgrade mode.the once the driver called “AT90USB162 DFU” installed, the HEX files can be downloading and be saved. Do not forget to keep the “auto enter upgrade mode” function. So that you can flash any HEX files as you like .The next thing is to upgrade its hard driver.
How to upgrade How to update PS3YES-Programm’s firmware?
Step 1. Connect PS3YES-Pro to your PC’s USB port
Step 2. About 6 seconds later, PS3YES-Pro’s 8MB USB storage will be installing on you PC.
Step 3. Right-click on the USB disk’s root path, and create a new text file and renamed it to ‘enter DUF.
Step 4. Eject the USB disk to PS3YES-Pro, remove it from PC and re-plug it to your PC’s USB port.
(The following steps also used on PS3YES! and PS3YES-Pro too)
Step 5. About 30 seconds later, the LED on PS3YES-Pro will switch off; you should install the ATMEL DFU driver to run the FLIP tool. You can jump to Step 8 if it was installed already.
Step 6. Install drivers to “AT90USB162″ device, you should download and install FLIP tool from ATMEL.
Step 7. You can found drivers to “AT90USB162” in the path of FLIP were installed, for example: “C:\Program Files\Atmel\Flip 3.4.2\usb”.
Step 8. Download the correct firmware’s hex file. Make sure it was storage in a full English path and without space. For example “c:\”.
Step 9. Run the FLIP tool. Make sure at the first use the “Load Hex File…” menu under “File” menu to load the new firmware hex file.
Step 10. Click the USB icon on FLIP and select “USB”, or press CTRL-U, and click “open” button in the following dialogs.
Step 11. Click “Run” button start update PS3YES-Pro’s firmware.
In the next topic there will be come to how to use PS3YES-Pro downgrade the console’s firmware from 3.50 .there are always so much topic for the console users yet .
No comments:
Post a Comment