iphone4 unlock Description :
A Gevey SIM card hack known as Gevey sim has been released to unlock the iPhone 4 unlock running the latest iOS 4.3 software and baseband.
The hack involves a wafer thing SIM, that needs to be inserted in the SIM card tray along with the actual gevey SIM card that you wish to use in your iPhone 4.
You then have to follow a short procedure of dialling an emergency number, hanging up, then toggling flight mode on and off a few times.
Then service with your chosen provider magically appears.
What is Gevey 3G turbo Sim ?
Gevey Turbo Sim as they call it is actually not a sim. It is a sim interposer .
An interposer is an electrical interface that directs the connection from one socket to another.
The purpose of a sim interposer in this case is tore-route a connectionto a different connection which can then unlock the iphone 4 .
Gevey Sim Interposer is an integrated circuit which contains the unlock exploit using emergency number dialing [112].
The video below can explain the integration in a better way .
iphone4 unlock Supported Versions :
Gevey SIM card supports iOS
* 4.0
* 4.1
* 4.2
* 4.2.1
* 4.3
Basebands
* 1.59.00
* 2.10.04
* 3.10.01
* 04.10.01.
iphone4 unlock Important :
In order to avoid the phone from being locked, the Gevey SIM needs to be with the phone all the time.
If you switch off your iPhone or battery drains out, you will lose the unlock and will need to follow the entire unlocking process again.
Here’s what to do to unlock:
* Turn off the iPhone 4;
* Place the adapter into the holder, on top put your micro-SIM;
* Get the design insert in the iPhone, turn;
* The status bar displays “No Signal”. Wait until its place appears the signal strength indicator;
* When this happens, call the emergency 112 call, and resets after 2 seconds;
* You go to Settings and turn Airplane Mode, and then turn it off;
* iPhone displays the message “Error SIM-card” and then “SIM-card inserted.”Click OK, and then again turn on Airplane Mode and turn it off again;
* “Error SIM-card reappears, but after a couple of seconds it will disappear and you will be able to use communication services. All this will need to do every time you reboot the phone.
Iphone 4 GEVEY Sim Adapter FAQ:
If your iPhone 4 has custom firmware, the GEVEY Sim adapter will not work. You must restore your iPhone 4 to the original iPhone 4 Firmware.
If after booting up the iPhone 4 jailbreak, and you do not see the “accept” screen, make sure you have an active sim and that it is correctly inserted in your iPhone.
What is GEVEY sim?
Gevey Sim is an unlock solution for iPhone 4 iOS 4.0, 4.1, 4.2, 4.2.1 with baseband 01.59, 2.10, 3.10.
Do I need to iphone 4 Jailbreak my iPhone?
No Jailbreak is require.
Note: if your iPhone is jailbroken and you are using GEVEY sim, do not do a reset to erase all data and settings.
Will I need to cut my sim card?
Yes, you have to cut your simcard to fit the provided GEVEY sim tray.
Is this unlock stable?
Yes, it is very stable.
How easy is it to install and setup GEVEY sim?
GEVEY sim setup and installation is very simple. Instruction is included with every GEVEY sim purchases.
Do I need leave the GEVEY sim in my iPhone4?
Yes, if you want to remain unlock and be able to use your iPhone4 with any carrier.
If you turn off the phone, do I have to redo the procesdure?
Yes
Will GEVEY sim interfer with my iOS or application setting?
No
Does 3G and GPRS work?
Yes, it can if you have a data plan ith your carrier. Not all carrier will work with 3G services, but all carrier will work with GPRS or EDGE.
Unlock Iphone 4,3G,3Gs 4.2/4.1 Online – Iphone 4 Jailbreak is Possible!
Unlock Guide has released the latest software version that allows to jailbreak and unlock iPhone 4 , 3G/3GS iOS jailbreak 4.2/4.1 and 4.3 beta and is compatible with Cydia and MobileSubstrate. As you’ve said, this jailbreak for iPhone 4 or 3G/3GS is compatible with all models of iPhones but to different degrees. For newer models like the new iPhone 3Gs and iPhone 4, this jailbreak is untethered.
UnlockGuide solution is confirmed by Dev Team and compatible to jailbreak iPhone 4/3G/3GS iOS 4.2/4.1 in just a few minutes. Our readers testimonials suggest that UnlockGUide software is authentic and the Jailbreak and Unlock procedure is very simple to follow and understand even by unexperienced users.
In order to Jailbreak&Unlock iPhone 4/3GS/3G – Visit UnlockGuide Official Website – Software compatible on iOS 4.2/4.1 and 4.3 beta
Jailbreak and Unlock iPhone 4,3Gs/3G ( iOS 4.2.*/4.1 ) up to 6.15 baseband - Click Here To Visit UnlockGuide.org Official Website – Download The New Software – Follow the instructions for untethered Jailbreak and Unlock
for more details on how to unlock iphone 4,3G,3GS 4.2.*/4.1 iOS with latest baseband !
This means that if you have an iPhone 3G or 3G bootrom old, no worries, your jailbreak will be untethered. Understand that you only need to jailbreak once.
If you have a newer model (iPhone 3G and new iPhone bootrom 4), your jailbreak will be untethered. This does not mean you have all the time need your PC or Mac to boot your iPhone. Indeed, if you have not installed any applications that interfere with the functioning of the SpringBoard or CommCenter, your iPhone will boot up correctly. However, applications jailbreak will not work.
However, if you have installed applications that require MobileSubstrate (Infiniboard example) and that interfere with the normal operation of SpringBoard, your iPhone will remain stuck on the Apple logo at startup. In this case, you will need redsn0w and proceed to Step 8 at each boot your iPhone.
We also remind those wishing to conserve or unlock unlock their iPhone, it should not be used redsn0w and update your phone iOS 4.2.1. Indeed, your baseband will be updated.
For others, here’s a quick tutorial to jailbreak 4.2.1 with iOS redsn0w 0.9.6b4:
Step 1: Download 4.2.1 and iOS redsn0w.
iOS 4.2.1 iPhone 4
iOS 4.2.1 iPhone 3G
iOS 4.2.1 iPhone 3G
Redsn0w 0.9.6b4 (Windows)
Redsn0w 0.9.6b4 (Mac)
Step 2: Make the update via iTunes 4.2.1 iOS 10.1 (this is important) using the firmware you just downloaded (Hold down the Shift key on Windows, then click Update and select the file. ipsw you downloaded).
Step 3: Start redsn0w 0.9.6b4 and fetch the firmware you just downloaded by clicking on Browse, then click Next.
If you have an iPhone 3G, redsn0w will ask whether Yes or No, you have a new iPhone 3G bootrom. To see if your iPhone 3G is old or new bootrom, simply check the serial number (Settings-> General-> Information-> Serial). If the 4th and 5th figures give a number less than 41, then your iPhone 3G is old bootrom.
Step 4: Select Install Cydia and click Next.
Step 5: Now make sure your iPhone is off and plugged into the USB to your computer before clicking Next.
Step 6: As mentioned, you’ll have to now press the power button. After a brief second, you’ll have to press the Home button and hold it while also holding down the power button. After ten seconds, release the power button while holding down the Home button for another 15 seconds. The installation should start.
Step 7: Leave redsn0w proceed to jailbreak. When it has finished, your iPhone will reboot automatically with IOS version 4.2.1 jailbreak.
Step 8 (for new iPhone 3G and iPhone bootrom 4): If your iPhone has expired or you need to reboot, you must jailbreak your iPhone again. To do this, proceed to Step 3, then in step 4, instead of Install Cydia tick, tick Just boot tethered right now.
With the release of the Beta 2 version of IOS 4.3, everybody is on the lookout for new features in this version for developer.
- Firstly it is a question of social music network for iPhone Ping happened with the update to iTunes 10, push in Beta 2 is present automatically in the settings but it is unclear if it is still present in the final version of OS 4.3!
Then the following rumor on the new iPad, in IOS 4.3 may be found FaceTime applications, camera and PhotoBooth suggesting that the iPad 2 has 2 cameras, a display and the famous Retina Photobooth application for Mac!
-The latest rumor is to be taken lightly because some team that shelled the IOS 4.3 beta 2 people found files named “Photo Stream” and or “Stream Media”, which implies a function related streaming service to MobileMe !
No comments:
Post a Comment